OEM/ODM Factory Frequency Converter 60 To 50 Hz - High Protection Special Frequency Converter For Water Pump XCD-H7000 – LINGSHIDA Detail:
Features
Design features
Design features
1. It adopts 32-bit motor dedicated CPU, which has high-precision frequency output, and the resolution reaches 0.01Hz.
2. High-precision PID control function and constant pressure function are more practical.
3. V/F control mode, and the carrier frequency is adjustable.
4. Voice boot guidance and troubleshooting functions are optional
5. All the data has been debugged before leaving the factory, the installation is easier and the operation is more convenient.
6. With multiple fault protection functions in conditions such as overvoltage, undervoltage, overheating, low temperature, overcurrent, overload, lack and etc.
7. PID feedback signal: current type (4-20mA), voltage type (5V/10V) sensors are common, terminal wiring and connectors are common.
8. The protection grade is IP65, which can adapt to various harsh environments.
9. All-aluminum casing design, which has good heat dissipation effect and better stability.
Model Table
Product installation size
Product Structure
Technical Parameters
Model Table
|
Voltage level |
Model |
Rated Capacity (KVA) |
Output current (A) |
Adapted motor |
A fixed way |
|
|
KW |
HP |
|||||
|
Single-phase 220V |
XCD- H7200-0.75K |
0.75 |
4.8 |
0.75 |
1 |
Wall-mounted |
| XCD- H7200-1.5K |
1.5 |
7.5 |
1.5 |
2 |
Wall-mounted |
|
| XCD- H7200-2.2K |
2.2 |
11.0 |
2.2 |
3 |
Wall-mounted |
|
| XCD- H7200-3.7K |
3.7 |
17.5 |
3.7 |
5 |
Wall-mounted |
|
| XCD- H7200-5.5K |
5.5 |
22.5 |
5.5 |
8 |
Wall-mounted |
|
|
Three-phase 380V |
XCD- H7400-0.75K |
0.75 |
2.5 |
0.75 |
1 |
Wall-mounted |
| XCD- H7400-1.5K |
1.5 |
3.8 |
1.5 |
2 |
Wall-mounted |
|
| XCD- H7400-2.2K |
2.2 |
5.1 |
2.2 |
3 |
Wall-mounted |
|
| XCD- H7400-3.7K |
3.7 |
9.0 |
3.7 |
5 |
Wall-mounted |
|
| XCD- H7400-5.5K |
5.5 |
13 |
5.5 |
8 |
Wall-mounted |
|
| XCD- H7400-7.5K |
7.5 |
17 |
7.5 |
10 |
Wall-mounted |
|
| XCD- H7400-11K |
11 |
25 |
11 |
15 |
Wall-mounted |
|
| XCD- H7400-15K |
15 |
30 |
15 |
20 |
Wall-mounted |
|
Product installation size
 |
|||||||
| Inverter model specifications | Input voltage | D（mm） | D1（mm） | L（mm） | L1（mm） | K（mm） | Screw specifications |
| XCD-H7000-0.75KW-15KW | 380V | 166.3 | 248 | 148 | 235 | 188 | M6 |
Product Structure
Technical Parameters
|
Input voltage range |
220V/380V±15% |
Input frequency range |
50～60Hz |
|
Output voltage range |
0V～rated input voltage |
Output frequency range |
0～120Hz |
|
Carrier frequency |
1.5K～16.0KHz |
Power range |
0.75～15.0KW |
|
Communication function |
Support 485 communication |
Protection level |
IP67 |
|
Overload capacity |
120% motor rated current for 5 minutes, 150% motor rated current for 5 seconds |
||
|
Programmable analog input and output |
0～10V analog voltage input 0～20mA analog current input Digital input and output |
||
|
Digital input and output |
3 multi-function terminal inputs, 1 programmable relay output |
||
|
Simple PLC, multi-speed control function |
Realize up to 8 speeds running through the built-in PLC or control terminal |
||
Product Application
The main uses of XCD-H7000:
According to the current working status of the air compressor and water pump, if the pressure reaches the preset value, the motor will run after unloading, which will generate unnecessary electricity demand and waste electric energy. After installing the frequency converter, and setting the required pressure, if the pressure exceeds the set value, the frequency converter starts to decelerate, to make the pressure be constant within the set range. The frequency converter controls the air compressor or water pump motor to automatically adjust the speed, so that the equipment used can achieve the best energy-saving effect under the condition that the pressure is basically unchanged. If it runs at the set pressure value for a long time, it will automatically stop. And when the pressure is lower than the set lower limit threshold, it will automatically start.
Product detail pictures:
Related Product Guide:
Our firm aims to operating faithfully, serving to all of our shoppers , and working in new technology and new machine regularly for OEM/ODM Factory Frequency Converter 60 To 50 Hz - High Protection Special Frequency Converter For Water Pump XCD-H7000 – LINGSHIDA, The product will supply to all over the world, such as: Hungary, Romania, Zambia, You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will provide our best service to satisfy all your needs! You should contact us right away!
By Olivia from Myanmar - 2018.09.19 18:37
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Nana from Naples - 2018.11.11 19:52
