Vector control frequency inverter

Vector control frequency inverter

Single-Phase/Three-Phase Input Three-Phase Output supplied by our factory integrated vector control function. This inverter can continuous running even if power supply off for a few seconds, this new feature allows the motor running automatically in unstable electric power supply environment, plus, it can track the induction motor’s speed in real time and start at its current speed when the power supply on, this feature makes the electric motor work more smoothly with less maintenance. Also, this frequency inverter adopts the most popular technical features, like PID control, Modbus RS 485 communication etc.

1217

Inverter Features

Power range: 0.4kW to 2.2kW in single phase 220V; 0.75kW to 400kW in three phase 380V

Input voltage fluctuate range: ±15%

32 bit high speed CPU special for AC motor speed control

Simple PLC with multi-step control function

Online modify and check parameters of the inverters

Overload capacity: 60s for 150% rated current

Dynamic torque current control, rapid response to load’s change

Output low frequency in high start torque: 0.5Hz/150%

Wobble frequency control special for textile machines

Easy settings: not need to set the electric motor and controller parameters specially. Easy reset factory default settings if any parameter was set incorrect

Rich fault protection and operation monitoring function

Built-in PID to allow both open loop & close loop control

Continuous operation in instantaneous electric power supply off

Tracking AC motor’s speed in real time

Built-in braking unit for 15kW and lower power

Offer RS485, support MODBUS-RTU communication protocol

The frequency inverter can realize self-adjustment intelligent in load sudden changing and rapid acceleration/deceleration running stage, to avoid overcurrent and short circuit issues.


Post time: Dec-17-2021