China New Product Single Phase Drive - High-performance General Vector Inverter XCD-E5000 – LINGSHIDA Detail:
Features
Design features
Personalization function
Design features
1. Using 32-bit motor dedicated CPU, which has high-precision frequency output, and resolution up to 0.01Hz.
2. Comes with simple PLC and PID control functions.
3. With vector control mode and V/F control mode, it is suitable for various working conditions.
4. Low-speed rated torque output is 0.5 Hz, and 180% rated torque can be output at startup.
5. With automatic voltage adjustment, frequency tracking starts when instantaneous stop.
6. With multi-speed control function, the carrier frequency is adjustable.
7. With multiple fault protection functions in conditions such as overvoltage, undervoltage, overheating, low temperature, overcurrent, overload, lack and etc.
8. Richer personalized functions
Personalization function
1. Excellent performance: realize asynchronous motor control with high-performance current vector control technology
2. Instantaneous stop and non-stop: In the case of instantaneous power failure, the load feedback energy is used to compensate for the voltage drop, and the inverter can continue to run for a short time after power failure
4. Fast current limiting: avoid frequent over-current faults of the VFD
5. Virtual IO: Five groups of virtual DIDO, which can realize simple logic control
6. Timing control function: set time range 0.0Min ~ 6500.0Min
7. Multi-motor switching: two sets of motor parameters can realize switching control of two motors
8. Multi-threaded bus support: Modbus, Profibus-DP, CANlink, CANopen
9. Motor overheating protection: optional IO expansion card 1, analog input AI3 and acceptable motor temperature sensor input (PT100, PT1000)
10. Multi-encoder support: support differential, open collector, UVW, resolver, sine and cosine encoders
11. User programmable: optional user programmable card can realize secondary development, and the programming method is compatible with Lingshida’s PLC
12. Powerful background software: supports inverter parameter operation and virtual oscilloscope function. Through the virtual oscilloscope, the internal state of the inverter can be monitored graphically
Model Table
Product installation size
Product Structure
Technical Parameters
Model Table
|
Voltage level |
model |
Rated Capacity (KVA) |
Output current (A) |
Adapted motor |
a fixed way |
|
|
KW |
HP |
|||||
|
Single-phase 110V |
XCD- E5100-0.4K |
0.4 |
4.5 |
0.4 |
0.5 |
Wall-mounted |
| XCD- E5100-0.75K |
0.75 |
8.2 |
0.75 |
1 |
Wall-mounted |
|
| XCD- E5100-1.5K |
1.5 |
16 |
1.5 |
2 |
Wall-mounted |
|
| XCD- E5100-2.2K |
2.2 |
23.5 |
2.2 |
3 |
Wall-mounted |
|
| XCD- E5100-3.7K |
3.7 |
40 |
3.7 |
5 |
Wall-mounted |
|
|
VSingle-phase 220V |
XCD- E5200-0.75K |
0.75 |
4.8 |
0.75 |
1 |
Wall-mounted |
| XCD- E5200-1.5K |
1.5 |
7.5 |
1.5 |
2 |
Wall-mounted |
|
| XCD- E5200-2.2K |
2.2 |
11 |
2.2 |
3 |
Wall-mounted |
|
| XCD- E5200-3.7K |
3.7 |
17.5 |
3.7 |
5 |
Wall-mounted |
|
| XCD- E5200-5.5K |
5.5 |
22.5 |
5.5 |
8 |
Wall-mounted |
|
| XCD- E5200-7.5K |
7.5 |
30 |
7.5 |
10 |
Wall-mounted |
|
| XCD- E5200-11K |
11 |
40 |
11 |
15 |
Wall-mounted |
|
|
Three-phase 380V |
XCD- E5400-0.75K |
0.75 |
2.5 |
0.75 |
1 |
Wall-mounted |
| XCD- E5400-1.5K |
1.5 |
3.8 |
1.5 |
2 |
Wall-mounted |
|
| XCD- E5400-2.2K |
2.2 |
5.1 |
2.2 |
3 |
Wall-mounted |
|
| XCD- E5400-3.7K |
3.7 |
9.0 |
3.7 |
5 |
Wall-mounted |
|
| XCD- E5400-5.5K |
5.5 |
13 |
5.5 |
8 |
Wall-mounted |
|
| XCD- E5400-7.5K |
7.5 |
17 |
7.5 |
10 |
Wall-mounted |
|
| XCD- E5400-11K |
11 |
25 |
11 |
15 |
Wall-mounted |
|
| XCD- E5400-15K |
15 |
32 |
15 |
20 |
Wall-mounted |
|
| XCD- E5400-18.5K |
18.5 |
37 |
18.5 |
24 |
Wall-mounted |
|
| XCD- E5400-22K |
22 |
45 |
22 |
30 |
Wall-mounted |
|
Product installation size
 |
|||||||
| Inverter model specifications | Input voltage | D（mm） | D1（mm） | L（mm） | L1（mm） | K（mm） | Screw specifications |
| XCD-E5000-0.75KW-15KW | 380V | 166.3 | 248 | 148 | 235 | 188 | M6 |
Product Structure
Technical Parameters
|
Input voltage range |
110V/220V/380V±15% |
Input frequency range |
50～60Hz |
|
|
Output voltage range |
0V～rated input voltage |
Output frequency range |
0～500Hz |
|
|
Carrier frequency |
0.5K～16.0KHz |
Power range |
0.4～22.0KW |
|
|
way to control |
Open loop vector control (SVC) closed loop vector control (FVC), V/F control |
|||
|
Speed range |
1:100(SVC) |
1:1000(FVC) |
||
|
Jog control |
Jog frequency range: 0.00Hz～50.00Hz, Jog acceleration and deceleration time: 0.0S～6500.0S |
|||
|
communication method |
Support RS-485 serial communication and CANLINK communication |
|||
|
Overload capacity |
115% motor rated current up to 4800 seconds 245% motor rated current up to 10 seconds |
|||
|
Programmable analog input and output |
0～10V analog voltage input 0～20mA analog current input 0～10V analog voltage output 0～20mA analog current output |
|||
|
Digital input and output |
Up to 10 multi-function terminal inputs, 1 high-speed pulse output 2 bipolar open collector outputs, 1 programmable relay output |
|||
|
Simple PLC, multi-speed control function |
Realize up to 16-speed operation through built-in PLC or control terminal |
|||
Product Application
XCD-E5000 product application industry:
Papermaking, food, fan, water pump, textile, printing, pharmaceutical, copper, printing and dyeing, packaging, woodworking machinery and other industries
Product detail pictures:
Related Product Guide:
The business keeps to the operation concept "scientific management, premium quality and efficiency primacy, customer supreme for China New Product Single Phase Drive - High-performance General Vector Inverter XCD-E5000 – LINGSHIDA, The product will supply to all over the world, such as: luzern, Israel, Canberra, We've been consistently broadening the market within Romania in addition to preparation punching in extra premium quality merchandise connected with printer on t shirt so that you can Romania. Most people firmly believe we've the whole capacity to provide you happy solutions.
By Daisy from Swiss - 2017.11.11 11:41
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Bernice from Cyprus - 2018.11.02 11:11
